New flow bench equipment for heavy-duty turbochargers VNT TWIN

The VNT Twin is the first flow equipment to adjust turbochargers from heavy-duty vehicles. In addition, the VNT Twin also has all the VNT’s functions to adjust light turbochargers, transforming the VNT Twin in an unique equipment.
It has two different areas for fixing the turbochargers (left for light vehicles and right for heavy-duty vehicles). So it is now possible, on…

New TCA PRO Turboclinic

The TCA PRO is the first turbochargers’ balancing equipment that allows to measure the efficiency of the compressor wheel.

The TCA PRO’s innovative design was conceived regarding the user’s comfort. With a large and strong workbench, the TCA PRO is also equipped with the innovative fixing platform that allows to balance turbochargers from light and heavy vehicles.

Using the same balancing…

New functions on Turboclinic flow test benches

We are pleased to inform you that Turboclinic has recently introduced some new functions on the flow test benches (VNT – VNT i – WORKBENCH) that will ensure you a higher speed and quality of turbo calibration work.

As specified on the attached document, the new functions will be activated “for free” to those customers who already have a test bench…

Complete electtronic actuators Diesel Levante compatible with all Hella models

FEATURES

 Technical Note: Dieselevante Electronic actuators are an original and different patent from Hella, so when tested on the market flow test benches, they have a slightly higher effort value than the original Hella one, but this does not preclude the correct operation of the actuator on the vehicle.

No warranty claims will be accepted on this product by customers without a…

New VNT Analyser

The new VNT is TurboClinic’s bet to replace the VNT v2. The large working area, the ergonomic design and the 21,5’ touch screen make this an extremely comfortable equipment for the user.

It bares the same reliability, precision and efficiency as its predecessor and it also uses the artificial vision to adjust the pneumatic actuators.

This is the VNT which grows with…

Diesel Levante at AUTOPROMOTEC 2017, Bologna

Diesel Levante will exhibith in Bologna from 24th to 28th May to the Fair AUTOPROMOTEC. We look forward to seeing you to show all news and promotions. (Hall 21 Stand B 89)

To visit Autopromotec 2017, in Bologna from 24 to 28 may, register on the site and you will receive your free entrance ticket by mail.

The e-ticket, valid for all…

New flow bench VNT i

Working everyday to be at the forefront of technology in the area in which it operates, TurboClinic shows once again why it is a world leader.

Synonym of constant innovation and concern for its customers’ comfort, TurboClinic presents the evolution of the most complete equipment on the market to adjust turbochargers’ variable nozzles with pneumatic or electronic actuators – the…

Complete inlet and outlet Oil Kit + Additive for engine wash cleaning

Now available Complete inlet and outlet Oil Kit for PSA engines 90hp and 110 hp + Additive for engine wash cleaning , fittable on Turbochargers Garrett 753420 and Mitsubishi 49173-0750#

KIT COD. OILKIT753420
Replacement of turbo code:

Garrett 753420 – 75050030 – 740821 – 762328
Jrone Turbo 8G15-300-310
Jrone coreassy 1000-010-108

View details

KIT COD. OILKIT49173
Replacement of turbo code:

Mitsubishi cod. 49173-07500..7501/7506/7507/7508
Jrone turbo cod. 8M02-200-527
Coreassy cod. 1000–050–127

View details

SPECIAL…

New All-in-one Turbo Bench

TurboClinic presents the TC Workbench, an unique equipment which integrates all that is needed to repair a turbocharger.

This all-on-one equipment gathers the functions of the TCA Compact, the VNT v2, the EAT v3, the Actuator Programmer, it also comes with a Pneumatic Oil Leak Tester that simplifies and automates the oil leak test.

Going even further, the TC Workbench allows to…